Jeep is known for its ruggedness and adventurous spirit, but what do you do when your key fob is dead and you need to start your Jeep? Don’t worry, we’ve got you covered with some simple steps to get your Jeep running even with a dead key fob.
Step 1: Locate the Key Fob
The first step is to locate the physical key inside your key fob. Usually, there is a release button or switch on the back of the key fob that will allow you to remove the physical key.
Step 2: Access the Key Hole
Once you have the physical key, you will need to locate the key hole on your Jeep. In most Jeep models, the key hole is located on the driver’s side door handle.
Step 3: Insert the Key
Insert the physical key into the key hole and turn it to unlock the door. If your Jeep has an ignition key hole inside the vehicle, you can also use the physical key to start the engine.
Step 4: Start the Engine
Once the door is unlocked, get inside your Jeep and insert the physical key into the ignition key hole. Turn the key to start the engine, and your Jeep should come to life.
Step 5: Replace the Key Fob Battery
After starting your Jeep with the physical key, it’s important to replace the battery in your key fob as soon as possible to avoid being in the same situation again. Refer to your owner’s manual or seek professional assistance to replace the battery.
Step 6: Consider a Spare Key Fob
To avoid the inconvenience of a dead key fob in the future, consider having a spare key fob programmed for your Jeep. This can serve as a backup in case the primary key fob battery dies or if the key fob is lost.
By following these simple steps, you can start your Jeep even with a dead key fob. Always be prepared by keeping a spare key fob and maintaining the battery in your key fob to ensure you never get locked out of your Jeep.
Frequently Asked Questions For How To Start A Jeep With A Dead Key Fob: Quick And Easy Fixes
How Can I Start My Jeep If My Key Fob Is Dead?
To start your Jeep with a dead key fob, you can use the keyless entry module to manually enter your vehicle.
What Is A Keyless Entry Module?
A keyless entry module is a device that allows you to unlock and start your vehicle without using a traditional key.
Where Can I Find The Keyless Entry Module In My Jeep?
The keyless entry module is typically located inside the vehicle, usually underneath the driver’s side dashboard.
How Do I Access The Keyless Entry Module In My Jeep?
To access the keyless entry module in your Jeep, you may need to remove the lower dashboard panel and locate the module behind it.
Conclusion
Having a dead key fob doesn’t have to stop you from enjoying your Jeep’s adventures. With the physical key and a little know-how, you can get your Jeep up and running in no time. Remember to replace the key fob battery and consider having a spare key fob to avoid any future inconvenience.