If you’re experiencing reduced visibility due to a worn-out rear windshield wiper on your Jeep Wrangler, it’s time for a change. Replacing the rear windshield wiper is a simple task that you can do yourself in just a few easy steps. This guide will walk you through the process of changing the rear windshield wiper on your Jeep Wrangler, ensuring that you have a clear and unobstructed view of the road ahead.
Step 1: Gather the Necessary Tools and Replacement Wiper Blade
Before you begin, make sure that you have all the necessary tools and a suitable replacement wiper blade for your Jeep Wrangler. You will need:
Tools | Replacement Wiper Blade |
---|---|
– Screwdriver | – Correct size for your Jeep Wrangler model |
– New rear wiper arm (if necessary) | – Designed for rear windshield use |
Step 2: Remove the Old Wiper Blade
Using a screwdriver, carefully lift the old wiper arm away from the rear windshield. Once lifted, press the small tab that holds the wiper blade in place and slide the old wiper blade out of the arm. Be sure to dispose of the old wiper blade properly.
Step 3: Install the New Wiper Blade
Take the new replacement wiper blade designed for the rear windshield of your Jeep Wrangler and slide it into the wiper arm. You should hear a click once the wiper blade is securely in place. Lower the wiper arm back onto the rear windshield, ensuring that it is properly aligned and secured.
Step 4: Test the New Wiper Blade
Before hitting the road, it’s important to test the new rear windshield wiper to ensure that it is functioning properly. Turn on your wiper system and observe the new wiper blade in action. Make sure it clears the rear windshield effectively without any skipping or streaking.
Step 5: Adjust the Wiper Arm (if necessary)
If the new wiper blade does not make proper contact with the rear windshield, you may need to adjust the wiper arm. Carefully lift the arm away from the rear windshield and reposition it slightly to achieve the right angle and contact with the glass. Lower the arm back into place and test the wiper blade again.
Step 6: Consider Replacing the Wiper Arm (if necessary)
If the wiper arm itself is damaged or worn, it may be necessary to replace the entire arm. This process will vary depending on your specific Jeep Wrangler model, so refer to your vehicle’s manual or seek professional assistance if needed.
Changing the rear windshield wiper on your Jeep Wrangler is a quick and easy task that can significantly improve your visibility while driving in inclement weather. By following these steps and ensuring that you have the right tools and replacement wiper blade, you can maintain a clear and unobstructed view through your rear windshield.
Frequently Asked Questions For How To Easily Replace The Rear Windshield Wiper On Jeep Wrangler: Quick And Simple Guide
How Do I Change The Rear Windshield Wiper On My Jeep Wrangler?
Changing the rear windshield wiper on your Jeep Wrangler is a simple process that can be done in a few steps.
What Tools Do I Need To Change The Rear Windshield Wiper On My Jeep Wrangler?
To change the rear windshield wiper on your Jeep Wrangler, you will need a replacement wiper blade, a small screwdriver or a wrench, and a clean cloth or towel.
Where Can I Purchase A Replacement Rear Windshield Wiper For My Jeep Wrangler?
You can purchase a replacement rear windshield wiper for your Jeep Wrangler at an auto parts store, online retailers, or even at some big-box stores that have automotive sections.
How Often Should I Change The Rear Windshield Wiper On My Jeep Wrangler?
It is recommended to change the rear windshield wiper on your Jeep Wrangler at least once a year or if you notice any signs of wear such as streaking or skipping.